Search
Membership
More
THE MINISTER OF SCIENCE AND TECHNOLOGY
Pursuant to the Law on Standards and Technical Regulations dated June 29, 2006;
Pursuant to Decree No. 127/2007/ND-CP dated August 1, 2007 of the Government detailing the implementation of several articles of the Law on Standards and Technical Regulations;
Pursuant to Decree No. 28/2008/ND-CP dated March 14, 2008 of the Government stipulating the functions, tasks, powers and organizational structure of the Ministry of Science and Technology;
At the proposal of the Director General of the Directorate for Standards, Metrology and Quality,
DECIDES:
1. |
TCVN 7949-1 : 2008 |
Shaped insulating refractory materials – Test methods – Part 1: Determination of compressive strength at ambient temperature |
2. | TCVN 7949-2 : 2008 | Shaped insulating refractory materials – Test methods – Part 2: Determination of bulk density and true porosity |
3. | TCVN 7950 : 2008 | Insulating materials – Calcium silicate materials |
4. | TCVN 7948 : 2008 | Magnesia-carbon refractory materials – Method for determination of total carbon content |
5. | TCVN 6530-13 : 2008 | Refractory materials – Test methods – Part 13: Determination of oxidation resistance of carbon-containing refractory materials |
6. | TCVN 7947 : 2008 | Alumina cement – Chemical analysis methods |
7. | TCVN 141 : 2008 | Portland cement – Chemical analysis methods |
8. | TCVN 7954 : 2008 | Flooring – Terminology, definitions and classification |
9. | TCVN 7960 : 2008 | Wooden flooring – Technical requirements |
10. | TCVN 7961 : 2008 | Wooden flooring – Test methods |
11. | TCVN 7955 : 2008 | Flooring installation – Construction and acceptance regulations |
12. | TCVN 7951 : 2008 | Epoxy resin bonding systems for concrete – Technical requirements |
13 | TCVN 7952-1 : 2008 | Epoxy resin bonding systems for concrete – Test methods – Part 1: Determination of viscosity |
14. | TCVN 7952-2 : 2008 | Epoxy resin bonding systems for concrete – Test methods – Part 2: Determination of sagging |
15. | TCVN 7952-3 : 2008 | Epoxy resin bonding systems for concrete – Test methods – Part 3: Determination of gel time |
16. | TCVN 7952-4 : 2008 | Epoxy resin bonding systems for concrete – Test methods – Part 4: Determination of bond strength |
17. | TCVN 7952-5 : 2008 | Epoxy resin bonding systems for concrete – Test methods – Part 5: Determination of water absorption |
18. | TCVN 7952-6 : 2008 | Epoxy resin bonding systems for concrete – Test methods – Part 6: Determination of deformation temperature under flexural load |
19. | TCVN 7952-7 : 2008 | Epoxy resin bonding systems for concrete – Test methods – Part 7: Determination of thermal compatibility |
20. | TCVN 7952-8 : 2008 | Epoxy resin bonding systems for concrete – Test methods – Part 8: Determination of shrinkage coefficient after curing |
21. | TCVN 7952-9 : 2008 | Epoxy resin bonding systems for concrete – Test methods – Part 9: Determination of compressive strength and elastic modulus in compression at yield point |
22. | TCVN 7952-10 : 2008 | Epoxy resin bonding systems for concrete – Test methods – Part 10: Determination of tensile strength and elongation at break |
23. | TCVN 7952-11 : 2008 | Epoxy resin bonding systems for concrete – Test methods – Part 11: Determination of bond strength |
24. | TCVN 7953 : 2008 | Epoxy resin bonding systems for concrete – Construction and acceptance regulations |
25. | TCVN 7956 : 2008 | Urban cemeteries – Design standards |
26. | TCVN 7957 : 2008 | Drainage – External networks and structures – Design standards |
27. | TCVN 7958 : 2008 | Protection of construction works – Termite prevention for new construction works |